Setup
Projector and Webcam/Phone
The size of the playable area is defined by type and positioning of the projector. In this case short-throw ACER 5000 Lumen small room projector was used resulting in 3.5m x 2.5m playing area. A webcam or mobile phone can be mounted next to the projector.
Gameplay: avoid collision with the virtual stick
Webcam or phone camera is tracking a red-labeled real-world puck (tracked puck is seen above the stick and tracker marker is green in the Figure) enabling AI "to see" the puck and drive virtual stick to intercept it. Please check the current app release to check different Gameplay exercises.
Red, green or blue pucks and balls or colored tape-labeled pucks can be tracked by the system.
Exercises on touch screen
Tracked pucks
Red, green or blue pucks and balls or coloured tape-labelled pucks can be tracked by the system.
All exercises can be attempted not only with a tracked real-world puck but also on phone or computer screen with the finger-touch. The use of Stylus on phones gives the best feeling. In the screen capture, finger touch control is indicated by a small green stick blade.
Exercises on touch screen
All exercises can be attempted not only with a tracked real-world puck but also on phone or computer screen with the finger-touch. The use of Stylus on phones gives the best feeling. In the screen capture, finger touch control is indicated by a small green stick blade.
Suggested projector setup to track a real word puck and interact with virtual defenceman's stick and other objects:
Mount your phone or webcam facing the playing area.
Start PlayLight app.
Press "Webcam Setup" and choose camera and adjust camera view.
Press "Cam to World" to sync virtual coordinate system with the real-world coordinates. App will flash some light patterns which shall be picked by the webcam. Please skip this step if you don't have projector connected to computer/phone. To monitor tracking press "Track Point".
Switch between Computer Vision and Touch control of the puck using the toggle "Switch to CV" and "Switch to Touch".
Track green puck by using the toggle "Switch to Green" and track the red-labeled one by "Switch to Red".